marble chips, stone, glass, and other aggreggates, binded with cement

2.61 g/cm2

Slabs are not reinforced. They require a substrate.

0.81%

Low-porosity, water-resistant, and suitable for most bathroom areas with proper sealing

16.8 MPa / 2,374 psi

37.4 gloss unit

1.57

Level 3, Slip Resistance 37 BPN

Slabs need to be fully supported. Use marine plywood fixed to cabinets/steel/block substrate. Plywood to span no more than 24” between cabinets and supports.

Maximum 6” on unsupported sections of overhang

Maintenance is similar to natural marble.

Wipe spills as they occur, and clean regularly with water and neutral cleaning solution.

Should water or liquid no longerbead-up on the surface, or counters are marking more easily or finish sheen has worn down, the clean + seal process can be repeated.